LR3 suspension air to coil conversion

[Javier Rodriguez]

Ok. I'm hoping a rebuild of the dryer will help.

 

[SoCal66]

Ok. I'm hoping a rebuild of the dryer will help.

Javier how are you liking the Arnott air shocks? I’m going to be replacing the original shocks soon. They’ve been on the LR3 for 136,000 miles and 12 years.

 

[maxx4wd]

I just did the arnott front strut upgrade about 2 months ago and I'm not getting any faults and it raises just fine but I can tell you that one side doesn't perform nearly as well as the other so I ended up getting the o-ring kit from britishpartsofutah to redo all the valve blocks - that should cure any front to back and side to side issues. I know internal leaks within the valve blocks are common and it can make your air pump work quite a bit harder then normal and cause false positive and look like a weak pump but may just be some valve-block issues...since youre experiencing front to back issues I would try the middle valve block (the valve block immediately in front of the air compressor on the driver's side) as it's a pretty easy o-ring swap and it's also cheap (and probably needs to be done regardless).