LR4 IPMB Camera System Programming Failure (Missing Calibration)

[Land Rover Joe]

Tribe,

After putting things back together from the major overhaul project on my 2010 LR4...I am reading error codes with my GAP IID Tool which denote a "IPMB Camera—Camera-System Programming Failure-Missing Calibration".

The DTC's are:

• B12BD-54 (2F)
• B12BE-54 (2F)
• B12BF-54 (2F)
• B12CO-54 (2F)
• B12C1-54 (2F)

Patrick from GAP tells me: "The one from the IPMB will require a visit to the dealer as we cannot calibrate the cameras."

That doesn't seem very good... does anyone have any experience with these fault codes or insight on how to eliminate these codes?

For reference, all the cameras appear to be working fine - I have run them all through and see well (and the backup camera automatically kicks on in reverse).

Many thanks and Best wishes!

 

[Rover Range]

Could be ghost codes.
Just ignore them if the cameras are working.

 

[Land Rover Joe]

Could be ghost codes.
Just ignore them if the cameras are working.

Will do - I was thinking maybe they will reset themselves with time - I will keep my eyes on them for a bit.