Suspension dropped while in traffic

[Rover Range]

Tight tolerance mode is used to "lock" the air suspension, when doing an alignment.

 

[Rover Range]

How to set the tight tolerance mode;

1. Put the Gearbox in PARK
2. Start the engine
3. Set the suspension to Normal Height
4. Open the driver’s door
5. Press the brake pedal lightly 3 times, letting the pedal come up fully each time
6. And close the door within 10 seconds from first press of the brake pedal
7. There will be 2 chimes from the instrument cluster after the door is closed, if successful
8. Each time the door is opened and closed, 2 chimes will sound, indicating it is still in tight tolerance mode.
9. To deactivate:
   
   1. Either turn the engine off, or drive it over 5 mp/h
   2. If you were to use this procedure for wheel alignment, you need to have the engine running the whole time.

 

[f1racer328]

How to set the tight tolerance mode;

1. Put the Gearbox in PARK
2. Start the engine
3. Set the suspension to Normal Height
4. Open the driver’s door
5. Press the brake pedal lightly 3 times, letting the pedal come up fully each time
6. And close the door within 10 seconds from first press of the brake pedal
7. There will be 2 chimes from the instrument cluster after the door is closed, if successful
8. Each time the door is opened and closed, 2 chimes will sound, indicating it is still in tight tolerance mode.
9. To deactivate:
   
   1. Either turn the engine off, or drive it over 5 mp/h
   2. If you were to use this procedure for wheel alignment, you need to have the engine running the whole time.

Haha didn’t know that you could do it like that. IID tool can do it as well.