This Is The Mod And Photo Thread!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bushway9172

Full Access Member
Joined
Mar 25, 2013
Posts
491
Reaction score
42
2005 LR3 HSE V8 4.4L
Front Bull Bar (Tactical 4x4)
RC 10000 Smittybilt Winch
Duel rigid lights
285/65 R18 Firestone Destination MT with full size spare.
Johnson Rods
Rock Sliders (Voyager Offroad)
Full standard roof rack with ladder (Voyager Offroad)

Coming Soon

Steel transfer case skid plate (Tactical 4x4) in the mail
Steel gas tank skid plate (Tactical 4x4) in the mail
Rear high clearance bumper with spare tire swing away (Tactical 4x4) next month
Supercharger (researching this one)
Second battery with dual battery system
Mounted air compressor (looking for a strong one that I can mount in the spare tire spot)
Snorkel
3 additional rigid lights
2 go pro cameras

That is it! Unless I get more great ideas from all you crazy land lovers!

Cheers,

Bozobrown

Bozobrown, I posted on your other thread, but now see you are running 285/65R18 MT's on Johnson Rods. I'm on the rods too (with 265/65's). What did you have to do to fit the 285/65's?
 

Bozobrown

New Member
Joined
Jul 28, 2013
Posts
4
Reaction score
0
Well..... I haven't quite got them to fit. I have an unreasonable amount of rubbing when I turn left or hit a dip at high speeds on the front of the back passenger wheel. I took the plastic well liner off and I am trying to cut it back and remount it to protect my gas lines. I am committed to full time 285's but it is a work in progress. I might just fabricate steel spacers to get an extra 1/2"lift. Or, I might have to move the gas lines and cut the metal away. The rubbing is annoying, but not constant or damaging.
 

bigiron

New Member
Joined
Aug 15, 2013
Posts
1
Reaction score
0
bigiron's ride

2001 blue Disco 2 SD w/factory brush guard
Enabled CDL
Franz bypass oil filter
Bilstein rear shocks
Rear driveshaft is custom w/zerks (eliminated rubber donut)
Front driveshaft is custom double cardan w/zerks
 

d_block22

Member
Joined
Apr 22, 2014
Posts
5
Reaction score
2
I drive an 08 LR3....

Current modifications

- old man emu lift
- 285/65r18 trail grapplers
- quarter inch spacers on all four wheels
- diamond audio

Future modifications
- tactical rover brush guard
- 2 dually rigids (one near each mirror)
- powdercoat, aftermarket rims
 

d_block22

Member
Joined
Apr 22, 2014
Posts
5
Reaction score
2
Well..... I haven't quite got them to fit. I have an unreasonable amount of rubbing when I turn left or hit a dip at high speeds on the front of the back passenger wheel. I took the plastic well liner off and I am trying to cut it back and remount it to protect my gas lines. I am committed to full time 285's but it is a work in progress. I might just fabricate steel spacers to get an extra 1/2"lift. Or, I might have to move the gas lines and cut the metal away. The rubbing is annoying, but not constant or damaging.

Fitting 285/65 MTs is easier that thought to be on LR
 

Jodybanemer

New Member
Joined
Nov 12, 2015
Posts
2
Reaction score
0
Tire swap

I have P245/70R16 on my LR. I want to put a set of235/85R16 on. Is there going to be a problem?
 

gct221250

New Member
Joined
Jun 11, 2015
Posts
3
Reaction score
0
New to site first post bought a 2003 Range Rover L322 TD6 about 18 months ago one owner from new bought as a retirement present for myself.Maintain vehicle myself good runner no problems.
Just like to say hello to everyone.


Sent from my iPad using Tapatalk
 

joey

Custom Rover Accessories
Staff member
Joined
Jun 28, 2004
Posts
10,471
Reaction score
181
Welcome to the forum.
 

gct221250

New Member
Joined
Jun 11, 2015
Posts
3
Reaction score
0
Thanks Joey look forward to joining in on occasions
gct221250
Isle of Man
British Isles
 

Latest posts

Forum statistics

Threads
36,222
Posts
217,577
Members
30,473
Latest member
OnoA
Top