floridarover
Active Member
- Joined
- Nov 21, 2007
- Posts
- 39
- Reaction score
- 0
Ok guys reaching out once again for some guidance. I have done some front end work to my Disco I (new steering box, steering stabilizer, pan hard rod bushings, and all four tie rod ends). I got the alignment done today after I put the tie rod ends on and it still has a death rattle when you hit a bump going above 50 mph. The alignment is good (I saw the print out and drives straight). Below 50 my Disco drives like new, above 50 after hitting a bump it seems like the shuttle on re-entry. I had a local shop (only works on Rovers) advise me that my pan swivels were fine. Any ideas or thoughts appreciated.