ignition cap wire harness for 97 range rover
- Thread starter fbryant
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Disco Mike
Full Access Member
- Joined
- Jun 20, 2009
- Posts
- 1,949
- Reaction score
- 4
Don't you have a coil pack instead of a distributor?
Just buy a good set of Magnecore 8 mm wires and replace them.
Just buy a good set of Magnecore 8 mm wires and replace them.
- Joined
- Jun 28, 2004
- Posts
- 10,495
- Reaction score
- 188
Agree, buy new wires... a 97 in the USA will not have a distributor unless either it is a very modified Rover, or someone has done some serious geeking.
97 range rover passenger blinker light
my 97 range rover passenger indicator light doesnt work, when i replaced the light the light came on, but it doesnt blink, secondly when i turn the vehicle off the light stays on!!!It;s been suggested that i have a bad relay, where is the relay that controls the issue that i'm having, Thirdly, all the other indicators are working properly......any suggestions will be very helpful.
my 97 range rover passenger indicator light doesnt work, when i replaced the light the light came on, but it doesnt blink, secondly when i turn the vehicle off the light stays on!!!It;s been suggested that i have a bad relay, where is the relay that controls the issue that i'm having, Thirdly, all the other indicators are working properly......any suggestions will be very helpful.
