metric temps

[nicktulloh]

Anyone know how to switch the temp displays back from metric?

 

[joey]

Press and hold the power button and the fan button at the same time untill it switches back to the way it should be.

This is on the A/C heat unit

 

[nicktulloh]

Thank you, thank you, thank you, thank you.

 

[nicktulloh]

Press and hold the power button and the fan button at the same time untill it switches back to the way it should be.

This is on the A/C heat unit

Well, that doesn't seem to work.

 

[joey]

That is odd, this is the only fix I know off to change to and from metric. I of course am presuming you are talking changing the and from metric on the Climate Controls...

 

[nicktulloh]

That is odd, this is the only fix I know off to change to and from metric. I of course am presuming you are talking changing the and from metric on the Climate Controls...

Yeah, that's it. I held then down (a few times) for up to 30 seconds and no go.

 

[joey]

Normally I would not tell anyone to do this, but disconnect the battery for an hour or so, then reconnect. Start the Disco and try again.

 

[Bendix Nobel]

ford recomends disconnect the battery and then hit the brake pedal to take the service charge out of the system. i am not sure if it will apply to LR

 

[clydon]

hold the button with three arrows, ( the one that turns off the exterior intake ) and press power button for three or so seconds. or may be other way around but definatly those two butons