I have a 97 disco 4.0 v8i. I cleared a p1193 code with the OBDII reader. When I rechecked the OBDII there were four flashing monitors and several that were solid. After driving the Rover two of the four flashing monitors became solid. I still have two that are flashing. Does this mean that the two, which are O2 monitor and the evap monitor, are still testing or do they just continuosly test and will always flash like that.
OBDII Question
- Thread starter raymor
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Disco Mike
Full Access Member
- Joined
- Jun 20, 2009
- Posts
- 1,949
- Reaction score
- 4
Be a lot more specific, what is flashing and what is solid?
Hi Disco Mike,
MM, FS, CC, OS, OH are all solid and CM and FS are still flashing. I am just wondering if these should be flashing or does it take a long time for them to complete the test.
some readers (like mine) don't use all functions on all vehicles.
Mine won't read my abs or trans, the icons flash a couple of times on start, then turn off.
did you get instructions with your reader? if not, can you download same?
luck,greg
Mine won't read my abs or trans, the icons flash a couple of times on start, then turn off.
did you get instructions with your reader? if not, can you download same?
luck,greg
