Rear Tail Third Brake Stop Lamp

[Land Rover Joe]

Tribe,

In addition to all the other work to do, I am going to be replacing the "Rear Tail Third Brake Stop Lamp" on my 2010 LR4 HSE (HD). This is the plastic raised tail light above the rear window.

Mine has gotten pretty beat up, cracked, and I think might be leaking...so time to swap that out as well.

I have purchased a new OEM unit from Lucky8 and wondering if folks have tackled this little project.

Many thanks!

 

[BBLR3]

Ive done mine. Wasnt too hard to do. Used a 3M urethane sealant. Cleaned off the old sealant the best I could on the metal. Apply new sealant, attach washer fluid hose and electrical connector, squish down the new cover. Put painters tape on overnight to hold everything in place.