Reset Service Required Message

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

doug9728

New Member
Joined
Aug 8, 2018
Posts
3
Reaction score
0
Location
Ohio
I'm sure this has been asked numerous times, but I can't find the thread. Sorry in advance.

How do I reset the Service Required Message (comes on when I start the engine) on my 2011 Range Rover.

Oil changed was just performed.

Thanks,

Doug
 

joey

Custom Rover Accessories
Staff member
Joined
Jun 28, 2004
Posts
10,473
Reaction score
181
How To Reset Range Rover Sport Service Light in 3 easy steps!
2014-2015
  1. Land Rover requires the use of a scan tool to clear the maintenance light
2006-2015
  1. With the vehicle in the OFF position, press and hold the TRIP RESET button
  2. While holding, turn the vehicle into the ON position without turning the vehicle on
* If the SII function is enabled, the information display will flash “Service” for 5 seconds and then display “Service” constantly
* If the SII function is not enabled, the information display will show the normal odometer and trip information and no further action is required

  1. Release the TRIP RESET button within 10 seconds of entering the reset mode, the information display will show “DIST” or “OIL”
  2. Press the TRIP RESET button within 10 seconds of releasing it and hold for more than 5 seconds
  3. The information display will show “RST” or “RESET” for 5 seconds and then reset the oil service value, and then show “END”
 

Latest posts

Members online

Forum statistics

Threads
36,259
Posts
218,004
Members
30,496
Latest member
washburn72
Top