Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Trolling for information on whether anyone is running these. I'm ok with running Johnson Rods full time.
I'm pretty sure I'm running 275/65/18, I can never remember. It's one of the two sizes you list. I'll look tonight. I use the Johnson Rods full time and the tires do rub while turning. It's not as bad now that I have about 20k miles on them. The back tires rub at about 10-11 o'clock in the wheel well. It's most annoying when driving on a windy road.
I'll try to take some pictures of where they rub tonight. Oh and it's on an LR3, shouldn't make a difference though.
Most of us switch to the 18" wheel to have more options for off-road capable tires. There are very limited options (apart from street tires) with the 19" stock wheels (255/55R19).Why not just stick with original size? Is there an advantage to the other sizes? At least there would be no worried about rubbing,etc.
Here are two more pictures of the DS wheel turned all the way left and the PS wheel turned all the way left. It doesn't look like there is clearance on the PS but there is about 0.5".
If you have any other questions or want any additional pictures let me know.
I am running 285/60/18 (31.46"), but mine look like they have a lot more sidewall than yours. Not sure if its just picture deception, but yours dosent look like they have all that much sidewall to them at all considering that should be a massive 32.6" tire!