How to wire driving lights to high beam signal

[Brian Harrison]

Just purchased Lazer Lamps for the grill on my 2016 LR4.

Installation went well except for tying into the high beam signal.

Looking at the engine from the front, fuse box/batter is on the left side. Wired into the battery for +/-. But, where do I pick up the high beam signal?

There are a lot of wires for the HID lights.

Anyone got a picture?

 

[mbw]

it's C0011-10 on the right side light. That is what I used for my relay.

 

[Brian Harrison]

Nice, thanks ... I'll try that and post results.

 

[Brian Harrison]

@mbw
I'm having a hard time tracking it down. Does that wire plug into the lower part of the headlamp like is shown in the image?

 

[mbw]

yep, UB (BLUE BLACK) wire, 10th wire when counting from the top (connector up I think). Read the diagram and howto i sent above.

 

[Brian Harrison]

Got it ... I was thinking that was it but I did not know how to read the wire plug properly. Blue/Black is 10th

Many thanks! I'll try it out this evening and see how it works.

 

[Brian Harrison]

Works great

 

[Carlos Jans]

Just purchased Lazer Lamps for the grill on my 2016 LR4.

Installation went well except for tying into the high beam signal.

Looking at the engine from the front, fuse box/batter is on the left side. Wired into the battery for +/-. But, where do I pick up the high beam signal?

There are a lot of wires for the HID lights.

Anyone got a picture?

I bought this https://www.lazerlamps.com/canm8-highbeam for total light control.

cheers
Carlos

 

[wallyyfm]

Resurrecting this thread - on this loom, does anyone know which wire is DRL? The new lazers have a position light function that I would like to wire in.

Thanks

 

[ktm525]

View attachment 11285

Works great

Wait. You wired the relay into the high beam signal correct? If so how come your aftermarket driving lights are on but not your highbeams?