Jrkramer76
Active Member
Been searching online for 40 minutes fir the correct torque spec for a vacuum pump replacement on my 2011 LR4 5.0 V8…Can anyone out there assist? Thank you ahead of time!
2011 LR4 5.0 vacuum pump torque specs anyone?
- Thread starter Jrkramer76
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
jlach993
Full Access Member
Tight enough by hand buddy. Done plenty vacuum pump jobs. Twice on two separate LR4’s. Don’t overthink it. Make it “snug”, then give it a big sharp fast “tight” then back off immediately! Suspension parts and engine internals need to be torqued to spec imho.
The D4 workshop manual, in the "Brake Vacuum PumpV8 5.0L Petrol" section, says 12N-m.
Similar threads
