NOT sure if this helps or not... not much is listed for the RRC in my manual... unless you want to start searching relay's
ELECTRICAL SEAT FAILURE
NOTE: Carry out following procedure if
seat failure occurs with seat obscuring
fixing bolts.
1. Check 30A fuses and courtesy lamp fuse B2.
2. Disconnect 9 way connector between seat ECU
and motors (memory seat). Power motor from a
seperate battery source.
3. If partial failure occurs in forward and reverse
travel only, change drive cable as required to
move seat to desired position.
4. If 2. and 3. not possible, move seat by driving
cables manually.