Increasing approach angle?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

powershift

Full Access Member
Joined
Jul 20, 2023
Posts
805
Reaction score
254
Location
Nevada
All LR4s can do this.
You have to wait until the suspension has completed the raising process in off road mode.
The raising indicator light has to be off. All doors closed.
I waited until the compressor turned off since I didn't find a LED. There is the light on the suspension mode switch that indicates position and an icon on the dash that shows what mode is all I found. I'm realizing now I didn't look at the 4x4 info screen though. Is it in there? Where is the raising indicator light?
 

Rover Range

Full Access Member
Joined
Jun 13, 2022
Posts
853
Reaction score
535
Location
Texas
On the ride height switch it self.
Orange light. Position flashes until selected height reached.
 

powershift

Full Access Member
Joined
Jul 20, 2023
Posts
805
Reaction score
254
Location
Nevada
On the ride height switch it self.
Orange light. Position flashes until selected height reached.
ah, I do have the LED lol. The arrow lights up as the busy indicator. With the LED off in off-road mode, foot on brake and then pressing UP on the air suspension switch for 3+ seconds nothing happens at all. I tried it in Park and Drive, 4L and it must be broken although there isn't any error message on the dash nor any dummy lights. Its completely unresponsive. Any ideas on what could be wrong?
 

Land Rover Joe

Full Access Member
Joined
Apr 10, 2011
Posts
222
Reaction score
32
The ManTech Steering Guard looks nice, but I've only seen pics of it fitted with an aftermarket bumper. It doesn't look like it would fit stock.
FYI - if it helps: my ManTech (OEM) Steering Guard is pretty sharp looking and just fits over the OEM Bumper.

Here is a really old, but pretty good (back when the truck was all shiny and still new!) photo which shows the plate quite well over the original plastic (with the OEM bumper and all).
 

Attachments

  • 6949787135_9fd0b349fe_b.jpg
    6949787135_9fd0b349fe_b.jpg
    183.4 KB · Views: 9

mm3846

Full Access Member
Joined
Feb 11, 2021
Posts
434
Reaction score
214
Location
LI, NY
FYI - if it helps: my ManTech (OEM) Steering Guard is pretty sharp looking and just fits over the OEM Bumper.

Here is a really old, but pretty good (back when the truck was all shiny and still new!) photo which shows the plate quite well over the original plastic (with the OEM bumper and all).
Wish they were still available. They’re the best looking ones for sure.
 

Latest posts

Members online

Forum statistics

Threads
36,751
Posts
223,126
Members
30,915
Latest member
Tumbler
Top