txfromwi
Full Access Member
Recorded on the 2016, but exactly the same on the 2013.
I hope you find this useful!
I hope you find this useful!
Lower Front Control Arms - Replacement - DIY Video
- Thread starter txfromwi
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
CRYA
Full Access Member
That's one I will not be doing without a lift!
f1racer328
Full Access Member
I did it on jack stands and it wasn't bad at all.
Stuart Barnes
Full Access Member
Same.
Dan, thank you for the video! I was having a hard time with my pickle fork (it bent before the ball joint moved), and searched a good bit for a separator - I just don't like hammering on things, seems uncivilized and a last resort. I found one that worked really well for me: https://www.amazon.com/gp/product/B09CT1XTK9
I had tried the one from Harbor Freight before, but it was too narrow to get around the ball joint shaft at the boot side. This one has different "saddles" and the 31mm one fit easily and got the job done quickly.
I had tried the one from Harbor Freight before, but it was too narrow to get around the ball joint shaft at the boot side. This one has different "saddles" and the 31mm one fit easily and got the job done quickly.
